Check out the Zoeller YouTube Channel for tips, training, and product videos!


Pivot Pro+ Series

Pivot Pro+ Series

Application- Commercial Buildings

Pivot Pro+ panels are built the same as Pivot Pro panels but in larger enclosures. This  larger enclosure allows for variations such as Reversing panels, Start Kit panels, and other future variations.


  • cCSAus certified to standard UL508
  • FCC Class-B certification to ISED Canada ICES-003, Issue 6
  • For outdoor or indoor use,-40 ˚F to +140 ˚F (-40 ˚C to +60 ˚C)


  • Red alarm beacon with 360˚ visibility
  • Audible alarm buzzer rated 95 db at 2’ (0.6 m)
  • SILENCE/RESET/TEST toggle switch with weatherproof rubber boot
  • HAND/OFF/AUTO control are included for each pump
  • RS-485 (12VDC, 2W) powered serial port for optional Z Control® Gateway connectivity
  • Auxiliary output dry contacts (NO-COM-NC) terminals, Form C, 5A resistive load
  • PUMP RUN dry contact, (NO-COM)
  • NEMA 4X 14”x12”x6” enclosure with lockable latch
  • Reversing and Start Kit panels contain additional required hardware


  • Control circuit powered by 120VAC, 60 Hz
  • Alarm circuit can be powered by separate power feed, if needed
  • Alarm and control circuits individually fused, 3A, fast-acting, 120VAC
  • Circuit breaker protection on 1Ph models
  • Multi-tap 200/230/460V transformer on 3Ph models
  • Max alarm and control circuit power consumption: Simplex models 32W, Duplex models 40W
  • Max standby power consumption: 5W
  • Terminals for 120VAC control power, 120VAC alarm power, up to 4 float switches (duplex), pump input power
  • 1Ph IEC motor contactors, models 120/208/240 VAC, 50/60Hz, up to 50A maximum
  • 3PH IEC motor contactors, models 208/230/380/460/575 VAC, 60Hz

Field Wiring & Maintenance

  • 4 enclosure mounting brackets are included
  • 2 sets of wiring schematics and installation instructions are included along with an inside door mounted QR code for easy access to additional support material online
  • All wires and terminal locations thoroughly labeled for easy identification
  • All components are serviceable (See FM3364 for available replacement parts)