Check out the Zoeller YouTube Channel for tips, training, and product videos!


Long Island Low Pressure Sewer System

The Zoeller Engineered Products Replacement Pump Series Model 6932 was the solution to a problem installation in Long Island, New York. The grease in this installation was a major contributor to the pump failure. The inlet to the pressure switch was completely blinded off and not allowing the on/off switches to function.

The ZEP 6932 was installed next to a competitor's pump in a duplex configuration and the high-level alarm float on the 6932 was actuated. Clover Pump and Motor of Long Island was servicing this customer and received a service call that would result in replacing the system. The basin had broken free from the discharge pipe and invert. The experts at Sewer Stewards made a plan to remove the floating basin and replace it with concrete. This decision made for a quick solution and easy control of the ground water. 

Clover Pump and Motor keeps an inventory of the ZEP 6932 units in Long Island which allowed them to make a speedy response to the trouble at hand to keep the sewer system operating without interrupting the day-to-day of its users.

Long Island 1
Long Island 2
Long Island 4

Clogged competitor pump

The control and alarm floats were a big consideration in selecting this pump as a replacement. The coverless version of the 6932 allows for ease of cleaning the pumps and the basin. The 6932 unit is designed to deliver up to 240 feet of head using a 2 HP, 1750 RPM, 240-volt 1 Phase motor. It’s also available in 1 HP for up to 150 feet of head. 

A new option for ZEP’s 2 HP unit is a 200-volt single phase power input. This eliminates the need for Buck Boost Transformers to convert power, saving approximately $400 per installation. 

Long Island 5

Replacement Pump Model 6932

The ZEP progressing cavity grinder pump has many design features:

  • All stainless-steel piping and valves
  • Allows you to see the water level and contents of the pit without removing the pump
  • Rotor designed with deflector plate, pump out vanes and recess to locate the mechanical seal. Silicon Carbide/Carbon with Viton O Rings
  • Integral pressure relief valve
  • Oil cooled motor with finned housing to dissipate heat
  • Float operated On/Off/Alarm/redundant On, 2-float design
  • Floats integrally installed and factory set tethered to the pump

All the features listed above were taken into consideration by the Service Provider in evaluating this design. Give us a call to discuss your application at 1-800-928-7867!

For additional information about the 6932, please contact Zoeller Engineered Products or your local Municipal Rep. You can also find out more on our website,

Zep Lps Logo 2 Color