61 HD Series

Heavy Duty Solids-Handling Pumps

61 HD Series

3" vertical and 3" & 4" flanged horizontal discharge patented pumps

Features and Benefits

Covered by US Patent Number 6,364,620.

APPLICATIONS

Pumping stations
Storm water removal
Wastewater transfer
Industrial wastewater

PUMP:

Solids – 2-1/2” (63 mm) spherical capability
Discharge: 3” NPT vertical or 3" or 4" flanged horizontal
Seals – dual mechanical carbon/rotary ceramic/stationary, Buna-N elastomers
Construction – cast iron ASTMA A-48, Class 30, 30,000# tensile strength, protected with a corrosion-resistant, baked-on epoxy powder coating
Balanced concentric pump housing and impeller
Attaching hardware – 304 stainless steel
O ring seals – Buna-N
Ductile iron impeller – 2-blade, semi-open with top pump-out vanes
Optional:
- Thermal sensor and moisture detection system
- Trimmed impeller
- Vortex impeller
- Bronze impeller
- 3" (76 mm) solids capacity (4" discharge units only)
- Silicon carbide seal(s)
- Additional cord length
- 3450 RPM high head unit (3" discharge unit only)
- High temperature construction (1-3 BHP, not CSA listed)
- Dry pit configuration
- Inverter duty motor (1-5 BHP, not CSA listed)
- Rail systems

MOTOR:

Stator – Class F insulation and lead wires, NEMA B design
Oil-filled, cast iron motor housing
Finned cast iron housing for faster heat dissipation
Ball bearings – dual high carbon chromium steel
Power cable length – 25’ (8 m)

Note: Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies.

25’ (8 m) of heavy duty power cable.
Protected cable entrance. The compression grommet allows for field-replacement of the cable.
Each conductor is individually sealed to eliminate cord wicking of liquids.
Lifting lug integral part of housing.
Oil-filled motor housing assures uniform heat distribution, lubricates bearings and conducts heat for cooler running.
Heavy-duty motor features ball bearing construction. Class F motor insulation is double-dipped and baked. End connections and lead wires are Class F. At maximum load, winding temperature will not exceed 250° F (121° C) with motor housing not submerged.
Tandem seals. Carbon/rotating, ceramic/stationary, Buna-N elastomers.
Upper and lower high carbon chromium steel ball bearings.
Stainless steel shaft and hardware resists corrosion.
Optional: Patented moisture-detection system with upper and lower probes, protecting the motor from liquid entry.
Optional: Thermal sensor protection. Motors have two, normally closed temperature sensors imbedded in windings.
Optional: 25’ (8 m) sensor cable.
Balanced ductile iron, two vane, semi-open impeller with top pump out vanes for seal protection. Keyed and bolted to shaft.
Concentric case reduces radial loading for longer bearing and seal life.
3” NPT vertical discharge or 3" or 4" flanged horizontal discharge.
Vent hole helps prevent air locking.
Units protected with corrosion-resistant, baked-on epoxy powder coating.

Product Specifications

Voltage Ability	200 / 230 / 460 / 575
Phase	1 & 3
Hz	60
Discharge Size	3" NPT Vertical 3" & 4" Horizontal Flange
Solids Handling	2.5" Standard, 3" Optional with 4" Discharge
HP	1.0 - 7.5
RPM	1750 & 3450
Seals	Carbon Ceramic
O Rings	Buna-N
Impeller	Ductile Iron Semi-Open, Ductile Iron Vortex, & Bronze Semi-Open Optional

Technical Data

SELECTION GUIDE

For information on additional Zoeller^® Engineered Products refer to catalog on Rail Systems, ZM1347; Control panels ZM1342; Float Switches and J-Boxes ZM1536; Float Switch Brackets and Pump Lifting Cables ZM1328; Check Valves and Piping Accessories ZM1348.

61 HD Series

61 HD Series

Features and Benefits

Product Specifications

Technical Data

SELECTION GUIDE

Pump Performance Curves

Design Tools

Sales and Marketing