7012, 7013 Grinder Pumps
7012, 7013 Grinder Pumps
Single direction grinder pumps. 7012 (High Head), 7013 (High Flow).
Features and Benefits
APPLICATIONS
- Small lifting stations
- Housing developments
- Pressure sewers
SPECIFICATIONS
PUMP:
- Discharge: 1-1/4” NPT vertical
- Seals – dual mechanical carbon/rotary, ceramic/stationary, Buna-N elastomers
- Corrosion-resistant, powder coated epoxy finish
- Stainless steel cutter and plate hardened to Rockwell C 55-60
- Attaching hardware and lifting bracket – 304 stainless steel
- O Ring seals – Buna N
- Impeller – bronze vortex impeller with top pump-out vanes
- Moisture detection system
- 135 lbs (61 Kg)
- Optional:
- Additional cord length
- Silicon carbide seal(s)
- Rail systems
- Pre-packaged systems
MOTOR:
- 1 Phase – integral thermal overload
- 3 Phase – thermal sensor and leads
- Stainless steel motor shaft
- Stator – Class F insulation and lead wires, Nema B design
- Housing – Cast iron, oil-filled, protected by cooling fins
- Ball Bearings – Dual high carbon chromium steel
- Power cable length – 20’ (6 m) standard
Refer to ZM1288 for packaged basin assemblies and accessories.
Note: Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies.
Product Specifications
Voltage Ability | 200 / 230 / 460 / 575 |
Phase | 1 & 3 |
Hz | 60 |
Discharge Size | 1.25" |
Solids Handling | Grinder, Slurry |
HP | 2 |
RPM | 3450 |
Seals | Upper - Carbon Ceramic Lower - Silicon Carbide/Carbon |
O Rings | Viton |
Impeller | Ductile Iron Vortex |
Technical Data
Model Comparison Charts
- Product Model Comparison Chart: 60hz
model seal mode volts phase amps hp hz lbs kg - Performance Chart, 016532 7012 7013: 60 Hz
Pump Performance Curves
- 016532 Performance Curve 7012
- 155279 Performance Curve, 7013: 60 Hz
- 016532 Performance Curve, Models 7012/7013: 60 Hz
Design Tools
- SK1322 Dimensional Drawing, Models 7011/7012/7013
- SK2977 Dimensional Drawing, Models 7011/7012/7013, 2 HP, Double Seal, 1.25" NPT X 2" NPT Discharge, 39-0134, 39-0135, Z-Rail
- SK1322 Dimensional Drawing, 70 Series, Floor-Mounted
- SK1665 Dimensional Drawing, 70 Series Simplex, 2 HP, Typical outdoor prepackaged with square guide rail system
- SK1667 Dimensional Drawing, 70 Series, 2 HP, Duplex Grinder System, Typical outdoor prepackaged with square guide rail system
- BIM, Revit, Models 7012/7013