X70 Series

Explosion-Proof Motors // Hazardous Location

Explosion-proof grinder pumps cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction

Tested to FM standards 3600 and 3615 by CSA

Features and Benefits

Covered by US Patent Number 6,364,620.

APPLICATIONS

PUMP:

440 stainless steel cutter and plate hardened to Rockwell C55-60
Discharge: 1-1/4" NPT
Seals – dual mechanical carbon/rotary, ceramic/stationary upper, carbon/silicon carbide lower
Moisture detection system
Construction – cast iron ASTMA A-48, Class 30, 30,000# tensile strength, protected with a corrosion-resistant, baked-on epoxy powder coating
Attaching hardware – 304 stainless steel
O ring seals - Viton
Impeller – Ductile iron (X7011), Bronze (X7012/X7013) vortex design
Optional:
- Trimmed impeller
- Silicon carbide seal(s)
- 25’ (8 m) power and sensor cables
- 35' (11 m) power and sensor cables
- 50' (15 m) power and sensor cables
- X7011 Reversing model
- X7012 High Head model
- X7013 High flow model
- Non-sparking rail systems
- Bronze impeller (7011 only)

MOTOR:

cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction
Tested to FM standards 3600 and 3615 by CSA
Stator – Class F insulation and lead wires, Nema B design
Thermal sensor with leads
Housing – cast iron, oil-filled
Ball bearings – upper and lower high carbon chromium steel
Power and sensor cable length – 20’ (6 m)

Note: Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies.

Voltage Ability	200 / 230 / 460 / 575
Phase	1 & 3
Hz	60
Discharge Size	1.25"
Solids Handling	Grinder, Slurry
HP	2
RPM	3450
Seals	Upper - Carbon Ceramic Lower - Silicon Carbide/Carbon
O Rings	Viton
Impeller	Ductile Iron Vortex